Burner
wt
designation
Q
R
R
1
S T U V W X Y Z
AA
BB CC
DD
lb
6514-6
— 53⁄16
103⁄8 19⁄16
37⁄16
19½
103⁄8
9 4 4
41⁄16
15 5⁄8 8¼
323⁄16 195
6514-7
— 61⁄8 101⁄8 19⁄16
315⁄16
20½
113⁄8
87⁄8 4¾
41⁄16
47⁄16 16
5⁄8
9¼
343⁄8
225
6514-8-A
— 73⁄8 11¼
113⁄16 45⁄16 22¾
123⁄8 10 65⁄16 47⁄8 415⁄16 17¾ 5⁄8
1213⁄16 4115⁄16
335
6514-8-B
13⁄16 8½
123⁄8
113⁄16 45⁄16 24
13½ 127⁄8 83⁄16 611⁄16 53⁄16 19
5⁄8
1213⁄16 4813⁄16
450
6514-9
15⁄16 133⁄8
— 313⁄16
63⁄16
28
16 137⁄16
115⁄16
87⁄16 63⁄16
23 5⁄8 1411⁄16 57½
795
6514-10
19⁄16 157⁄16
— 43⁄8 515⁄16
32½
20½ 135⁄8 131⁄16 113⁄16 611⁄16 27½ ½
161⁄8
6313⁄16 1035
Dimensions in inches
6514- /LX (refractory tile)
Dimensions 6514
Page 2
Burner
wt
Recommended Recommended
designation AA BB CC DD lb Sensitrol
™
oil valve
pilot tip
6514-6
16 ¾
83⁄8
325⁄16
215
1813-02-C
4021-12
6514-7
17 ¾
93⁄8
34½
250
1813-02-D
4025-0-T
6514-8-A
18¾
¾
1215⁄16 421⁄16
370
1813-02-D
4025-0-T
6514-8-B
20 ¾
1215⁄16 4815⁄16 495
1813-02-D
4025-0-T
6514-9
24¼ 13⁄16 147⁄8
5711⁄16
860
1813-01
4025-2-T
6514-10
27½ 11⁄16 165⁄16 6313⁄16 1085
1813-01
4025-2-T
6514- /LC,L4,L9 (jacketed tile)
A square threaded fl ange is used for sizes -6, -7, -8. SW style (suitable for slip-on or welded connection) inlet may be ordered as a
special option. An SW inlet is standard for -9 and -10 burners.
Opening in furnace shell or outer wall must be
½
" larger than dimension "AA" to allow for mounting plate fi llet and draft .
Blank boss--This may be ordered as a special option with a 1
½
" tap suitable for 5025-3-1T Oil Pilot, in which case North American
will drill out
½
" web of refractory left in tile before shipment, and the burner nose will be positioned so none of its holes are in front
of that opening. For -10 size, an appropriate 1
½
" npt half-coupling will be added as a special option.
1" fpt for electrode or UV fl ame detector.
Pipe nipple and optional (recommended) Sensitrol Oil Valve are not included as part of the burner assembly, and must be ordered
separately. Dimensions Z and DD assume a
3⁄8
" close nipple between burner and Sensitrol Oil Valve (6514-6 through -8-B) and a
½
"
close nipple between burner and Sensitrol Valve (6514-9 and -10).
Applies when optional SW inlet is specifi ed.
Flanged connection--a standard Fives square threaded fl ange is used.
Flanged connection--a standard ANSI 125 psi threaded fl ange is used.
Optional 8773 fl ex tubing purchased separately from North American.
ANSI or SW fl anges: Flat face companion fl anges and full face gaskets are supplied with this equipment.
Do not use raised face fl anges that may damage mating fl ange.
Dimensions in inches
All 6514